- add IOptionalBuildObjectPropertiesContainer interface to use for
objects that supply optional build properties
- add new IOptionalBuildProperties interface that defines
optional build properties donated by external plug-ins
- add new
- change IConfiguration to an IOptionalBuildObjectPropertiesContainer
- change IManagedProject to be an
IOptionalBuildObjectPropertiesContainer
- fix ProcessClosure to ensure that readers are not null before
accessing them
- fix Container launch delegate to look at project optional
build properties for active configuration to fetch connection
and image info and use said info to find a matching
launch or create a new one
- have Container launch delegate use the image name as part of
the launch config name
- have Container launch short-cut also use the project's
optional build properties for the active config to get
connection and image information before any defaulting
- change AutotoolsNewMarkerGenerator to store the command
launcher as an ICommandLauncher
- add new CommandLauncherFactory extension to cdt.core that
allows plug-ins to specify a CommandLauncherFactory that
will return an ICommandLauncher based on the project
- add macros for new extension to CCorePlugin
- add new CommandLauncherManager class that loads
CommandLauncherFactory extensions and is used to give
an ICommandLauncher wrapper that will go through the list
of CommandLauncherFactory extensions until one returns
non-null ICommandLauncher
- add code to RemoteCommandLauncher so it will use the
CommandLauncherManager to get the local launcher
- also change RemoteCommandLauncher to check at execution
time whether the command is local and in that case use
the local command launcher
- add new ICommandLauncherFactory interface
- add new ContainerCommandLauncher to launch
- add new ContainerCommandLauncherFactory class for returning
a ContainerCommandLauncher instance to launch commands
in a Docker Container
- change MakeBuilder to use CommandLauncherManager to get
its ICommandLauncher
- change CommandBuilder to use CommandLauncherManager too
- ditto for Builder and AbstractBuiltinSpecsDetector and
ExternalToolInvoker
- change Configuration to load/store optional build properties
as well as return the properties to get/set
- ditto for MultiConfiguration
- change ManagedProject to implement IOptionalBuildOptionProperties
interface
- ditto for ProjectType
- create new OptionalBuildProperties class to store optional
build properties for a configuration
- bump cdt.docker.launcher to 1.1.0
- use CommandLauncherFactory extension to define
ContainerCommandLauncherFactory
- add optional ContainerPropertyTab which allows the end-user to
optionally choose to build a C/C++ project in a Container
and specify the connection/image to use
- in LanguageSettingsSerializableSettings class, call the
CommandLauncherManager getLanguageSettingEntries method
to get the massaged language setting entries based on the
current list
- in LanguageSettingsProviderSerializer, try and get the
pooled entries using the cfg description so that it will
have the project and can use the CommandLauncherManager
to get entries from image
- in ContainerCommandLauncherFactory move cached headers under
a HEADERS directory in the plug-in area
- create a sub-directory for the connection and a sub-directory
for the image based on cleansed names
- store the real names of the connection and image to use
later in the DockerHeaderPreferencePage
- modify LanguageSettingsEntriesTab to force the horizontal
scroll bar to appear (this is a bug in SWT SashForm support
and the fix here isn't quite correct, but is better)
- add new DockerHeaderPreferencePage that allows user to
remove cached headers from images
- change C/C++ Docker preferences to be titled: Docker Container
- fix LanguageSettingsWorkspaceProvider.getSettingEntries method
to use the CommandLauncherManager so entries will be transformed
to use cached headers
- add BaseDatabindingModel class
- add DataVolumeModel class to model a volume mount
- add ContainerPropertyVolumes model to model volume specification
and selected volumes
- add properties to ContainerCommandLauncher to represent
volumes and selected volumes for a configuration
- add ContainerDataVolumeDialog for specifying a volume
mount by the end-user
- add a null detector for cfgDescription in
LanguageSettingsSerializableProvider
- fix AutotoolsNewMakeGenerator.getWinOSType to not specify "." for
working dir
- fix GCCBuiltinSpecsDetectorCygwin to not map paths to Cygwin if
the current configuration is enabled for container build
- add logic to ContainerCommandLauncher to look for Windows
file formats and change them to unix format and map
any "." working dir to be /tmp
- fix ContainerLauncherConfigurationDelegate similarly
- fix AbstractBuiltinSpecsDetector to pass in the current
configuration description when getting the CommandLauncher
since the current configuration may not be the active
configuration
- change ContainerPropertyTab to add Elf and GNU Elf binary parsers
when build in Container is chosen so that output executables
are treated as Binaries by the CDT project
- add documentationl for the ContainerPropertyTab in Build Settings and
the Data Volume dialog pop-up it brings up
- change CommandBuilder to accept a project as an argument
to its constructor and to pass this as an argument to
the CommandLauncherManager
- have StepBuilder pass project when creating a CommandBuilder
Change-Id: Ia78488b93056e6ec7ca83a6c87b3a9d2b9424943
ASTCache now sets the AST as the initial lookup point when invoking
an ASTRunnable.
In addition, OpenDeclarationsJob sets the selected node as a more precise
lookup point.
Change-Id: I9b32fccd80bc1b13e6da49a80a896b595784b868
This is a revised approach for fixing this bug by giving using-
declarations implicit names for each delegate binding.
Change-Id: Ib9695c30258b8cb322ae1548ab022e357318135c
Provide a way to add new toolchains. Also start of UI to allow for
reordering them to help with toolchain selection for targets.
New Generic Target Wizard for the new wizard2 extension point for the
Launch Bar Target UI.
Change-Id: I60635ab27dad5b69df72c339337473183dcf711a
CSourceHover did not know how to handle UnknowMemberClasses
Change-Id: I4ef6a4ad794e670c4d5e9ccc9cea204f8d273f2a
Signed-off-by: Michael Woski <woskimi@yahoo.de>
As ArrayContentProvider is stateless, re-using the global instance
avoids a few allocations.
Change-Id: Ia378195c2c90e35badcf6e2c1938a93877a442e6
Signed-off-by: Andreas Sewe <andreas.sewe@codetrails.com>
This resolves a significant UI performance regression so
now line numbers don't need to be recalculated for areas
where they are already known.
Change-Id: I4668d620cde24b7cd8c6a22e9c022eaf5b237ff2
Re-wrote the BuildConsolePartitioner to do as many operations as possible
in the non-UI thread and only to update the UI thread in batches.
Key changes:
- The UI thread "pulls" changes when it is ready, this means that many
lines of output are updated in one go. This compares to the "push" that
the non-UI thread used to do. The previous code pushed a change to the
UI thread on every line of build output.
- The limit on console size is now soft, rather than recalcuating the
entire document on each line (i.e. add line at bottom, remove line
from top) the document is truncated to the limit size as it reaches
2x the limit size. This calculation is also done more effeciently by
tracking the number of lines each partition contains rather than
recalculating them.
- Folded most of the implementation of BuildConsolePartition into
BuildConsolePartitioner. This is because the partioner has a global
view and is much more efficient at determining if adjacent partitions
can be combined. In addition, rather than having the complexity of
splitting partitions that were too long, instead make sure we don't
create such partitions in the first place.
Change-Id: I47543db3fef754e779684cae44d3316982f1bc0a
Specifically, this patch:
- Adds support for a new builtin, __builtin_assume_aligned.
- Models __builtin_constant_p as a function instead of a macro.
This inhibits constexpr evaluation, but allows for correct
type-checking.
- Diagnoses misuses of known builtins, instead of ingoring them like
unknown builtins.
Change-Id: Ie5a26f2010dc5b19e6f32a8c6a1237fe88da393e
The Package Explorer's content provider is not extensible the same way
as the CommonNavigator so it does not contain CElement in its tree;
instead it contains IResources (IFile, etc) and Java specific elements.
However, the file language mapping property page is set to be displayed
on selections that adapt to translation units.
So this change allows IFiles to be adapted to ITranslationUnits
therefore the property page can still be shown from the Package Explorer.
Change-Id: Ia52a62c2d8800e2a4f0404bc00e346decbacaa3b
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
The following standard headers were missing from the file associations:
- cuchar
- cstdalign
- scoped_allocator
- shared_mutex
Additionally, cinttypes is no longer (since C++11) a GCC extension
Change-Id: I1545257d7d934c970de4f2f45f4e15499cec3fd9
Signed-off-by: Felix Morgner <fmorgner@hsr.ch>
- add new FixitErrorParser that extends RegexErrorParser and is
used to replace the error parser for GNUCErrorParser
- add new FixManager class to bind a fixit message with its
problem marker
- modify ProblemMarkerFilterManager to register the last
accepted ProblemMarkerInfo for a particular resource so
the FixitErrorParser can find the last error marker for
the file that precedes the fixit message
- FixitErrorParser looks for fix-it messages and binds them
via FixitManager to the last error marker for the file
- add new Fixit class to contain the details of a gcc fix-it
- add new QuickFixForFixit which applies the gcc fix-it for the
file
- add new (.*) regex in codan.ui.checkers patterns that will
trigger before any other error and will look for the
fix-it message format
- change cdt.core to expose cdt.internal.errorparsers to
codan.checkers.ui
- change codan.core to expose codan.internal.core.model to
codan.checkers.ui
- fix CDocumentProvider.setOverlay method to not overlay
a CMarkerAnnotation that has a quick fix
- when deleting all C problem markers, also make a call
to FixManager.deleteAllMarkers() so markers aren't
left referenced
Change-Id: Ibf8ff7d8addb1bf092dc4ef35de0d92de0309589
Remove if block on !singleLine within an if (singleLine) test. The
code has been unreachable since 2006.
Change-Id: Ie720716a58f892371e3ae5b810dae6e77736324f
Signed-off-by: Jonah Graham <jonah@kichwacoders.com>
It's internal and not used anywhere.
Change-Id: I194b4db7f4284bc0820221220301515a12b17ae4
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Generified, some lamnda conversions and some non-javadoc removal.
Change-Id: Ibf0493917ac3da7531de1ca591a9bfdc250ddf2a
Signed-off-by: Alexander Kurtakov <akurtako@redhat.com>
This removes a lot of pom.xml from the source tree. This is using the
"POM-less" Tycho functionality.
See
https://wiki.eclipse.org/Tycho/Release_Notes/0.24#POM-less_Tycho_builds
One advantage of this is that you do not need to update the version in
the pom.xml when you change it in the MANIFEST.MF because the pom.xml is
automatically generated. This also reduces a lot of the duplicated
information and pom.xml repetition.
- Maven 3.3 and up is required.
- Only eclipse-plugins and eclipse-features can be pom-less.
Repositories, target and others still have pom.xml.
- New parent poms are added because a parent is necessary directly one
level above the plug-in/feature that will have its pom generated
- Some test plug-ins had to be renamed .test -> .tests because it's
required so that it detects that it's a test plug-in
- Some suites were renamed so that they all use the same consistent name
"AutomatedIntegrationSuite"
- Profiles were added for the more common test configurations. They are
activated by the presence of simple .properties files that only serve to
activate the correct profile. The profiles:
- One for UI tests (UI present and start in UI thread)
- One for SWTBot tests (UI present and do not start in UI thread)
Other test plug-ins that are too different are kept intact and still
have
a pom.xml
- Fragments are kept intact since they all have different target
platform configurations
Change-Id: I9d73380eb766f547830c552daf08053a30b1845c
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
