When the baseline was changed to CDT 9.3, the sequence number was not
changed. That means that Eclipse PDE does not "see" the change to the
content and therefore while it appears that the baseline is 9.3, it will
continue to actually be 9.2, leading to lots of API errors.
Change-Id: Ie4103f24fe28afcadd8722b0da463febe372bdd8
Add core, UI and feature plugins for the new autotools project which
uses template wizard and core build.
The template wizard currently supports generating a simple autotools
project as described using a template manifest.
The project generator sets new autotools nature associated with new
autotools build config provider.
The generated autotools project has been tested to compile fine with gcc
(x86_64-linux-gnu-gcc) toolchain.
Change-Id: I8349999d551bb693725a246340cf46266150fadc
Signed-off-by: Chin Huat Ang <chin.huat.ang@intel.com>
Also restructures the pom.xmls to put the modules in the top level
so we can order them to have the test plugins build after them.
Change-Id: I2f0e4ebd252791fb8844cdf0f635d574946207aa
- org.eclipse.cdt and org.eclipse.cdt.sdk features have same
name as plug-ins so we need a pom.xml to distinguish the
groupid for Sonar job to work
Change-Id: I7098021d40fec66ee5a6dc093bd12c3ee896c4f7
- This commit is still needed to allow CDT Sonar job to run
so that features that have same name as plug-ins
will be distinguishable by Sonar job
Change-Id: I3eb3f3cf94d5f4338d72c5d19d0baf2f7506c388
Add Arduino Serial Monitor as a Terminal Connector type. It uses the
Terminal's new cdtserial connector for communication and adds a
config panel that lets you pick the Arduino remote connection to
auto select the serial port. Also switched the Arduino launch
to fetch the serial port out of the global registry to pause and
resume the port while launching. The Terminal does not use the
remote connection to get the serial port.
Note: also adding the terminal as a dependency for builds. Yes,
further adds to our build cycle, but we're dealing with it so far
with o.e.remote.
Change-Id: I5a7cc9ffbf8ae60cd86e0e5440547d12202acbac
Those features have the exact same id and groupid than a plugin
which throws off SonarQube with:
"Two modules have the same id: 'org.eclipse.cdt:org.eclipse.cdt.util'.
Each module must have a unique id."
In the pom.xml, we can specify a different groupid which resolves the
problem. Alternatively, the feature id could have been changed but that
would break upgrades.
Change-Id: Ib2912ad854a3af431b96f89a6ead1bcb6d06ba60
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
There was an attempt to not delete the rcp*/ folders when deleting the
repository folder but it left the folders empty. The updated pattern
seems to work correctly.
Change-Id: Ibb0e399044d87ad2374fe2f0f96e1f7eaf70bcd0
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
When building o.e.cdt.repo we used to delete the
entire directory in which we put the build result. However, it is
possible that the Standalone debugger was built before o.e.cdt.repo and
already put the valid rcp and rcp-repository directories in that
location. We therefore should not delete those.
Change-Id: I5d1608bceb48633f2205af8f8282e884ff223351
This removes a lot of pom.xml from the source tree. This is using the
"POM-less" Tycho functionality.
See
https://wiki.eclipse.org/Tycho/Release_Notes/0.24#POM-less_Tycho_builds
One advantage of this is that you do not need to update the version in
the pom.xml when you change it in the MANIFEST.MF because the pom.xml is
automatically generated. This also reduces a lot of the duplicated
information and pom.xml repetition.
- Maven 3.3 and up is required.
- Only eclipse-plugins and eclipse-features can be pom-less.
Repositories, target and others still have pom.xml.
- New parent poms are added because a parent is necessary directly one
level above the plug-in/feature that will have its pom generated
- Some test plug-ins had to be renamed .test -> .tests because it's
required so that it detects that it's a test plug-in
- Some suites were renamed so that they all use the same consistent name
"AutomatedIntegrationSuite"
- Profiles were added for the more common test configurations. They are
activated by the presence of simple .properties files that only serve to
activate the correct profile. The profiles:
- One for UI tests (UI present and start in UI thread)
- One for SWTBot tests (UI present and do not start in UI thread)
Other test plug-ins that are too different are kept intact and still
have
a pom.xml
- Fragments are kept intact since they all have different target
platform configurations
Change-Id: I9d73380eb766f547830c552daf08053a30b1845c
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Eclipse 4.7 removed AIX support so CDT should also remove it.
Change-Id: I9ed50a4c47e7b861eb2adeb86e857d2a78b4834b
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
This commit removes explicit source features and has tycho create them
automatically, along with all other source features that were not
previously defined. The logic to auto-generate is in the root pom.xml
For all pre-existing source feature, the name presented to the user has
been changed to use the default name used by Tycho, which is "Developer
Resources". This will provide a more standard user-experience with
respect to other source features built by Tycho.
Existing SDK features are kept for backwards compatibility.
All the names of the auto-generated source features that replace an
existing source feature have stayed the same except for the
'testsrunner' feature; for that one name change, a p2.inf file is added
to allow upgrading from the old named feature to the new named feature.
Change-Id: Ie632e798c93898fd828f88df4983fc43e2749d22
The CDT does not need to depend on itself.
I believe this dependency was added while troubleshooting another
problem.
Change-Id: Ic79cc8c00c67f323198bb49d1596e4d254bbd924
The org.eclipse.cdt.launch.remote feature is the only non-source,
non-sdk feature to include the corresponding source plugin for it's main
provided plugin. An org.eclipse.cdt.launch.remote source-feature should
be created to provide the source plugin.
Change-Id: I2e396270f0d19f023e75452c316da0e4eda495b1
Signed-off-by: Roland Grunberg <rgrunber@redhat.com>
This allows us to get the dependencies from one place and also this
update site is more stable as it is not updated very frequently.
Change-Id: I40de8fd0535270959ccad7b02c9d57aae765bc79
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
The streams connector provided by TM was located in the o.e.tm.view.*
plugins which bring in the terminals view. This patch implements our
own streams connector so that we don't have this extra dependency.
Change-Id: If2a8bdfbdd87eb9ec5c42180a372634e322ba1c1
This patch provides a full GDB console in the standard Console view.
The full console is disabled for Windows due to PTY limitations.
The new console will be triggered automatically when using GDB 7.12 (or
its pre-release) and running on Linux.
Known issues with this patch:
- Cloning the console view breaks the console
- Pinning the console view is not supported
- Interrupting execution in all-stop mode fails with the new console
- Pagination causes some events to be lost (all-stop only)
Change-Id: Iee6ef5228ca17bd829eb743cb41a142afe6714dc
Just keeping up with the latest.
Change-Id: I72a42b8190067a5ad25576552fb408d2aea4212c
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
So that it can find the org.eclipse.ui.trace.traceComponents
extension point.
Change-Id: Iad5916a39551a543e76604efbe9b73d30b5a89c7
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
