There is also a new script to verify completeness of .gitattributes:
releng/scripts/verify_gitattributes.sh
Change-Id: I2ce270852ab54b66b6c474a6ec94203fe5bba78b
- add IOptionalBuildObjectPropertiesContainer interface to use for
objects that supply optional build properties
- add new IOptionalBuildProperties interface that defines
optional build properties donated by external plug-ins
- add new
- change IConfiguration to an IOptionalBuildObjectPropertiesContainer
- change IManagedProject to be an
IOptionalBuildObjectPropertiesContainer
- fix ProcessClosure to ensure that readers are not null before
accessing them
- fix Container launch delegate to look at project optional
build properties for active configuration to fetch connection
and image info and use said info to find a matching
launch or create a new one
- have Container launch delegate use the image name as part of
the launch config name
- have Container launch short-cut also use the project's
optional build properties for the active config to get
connection and image information before any defaulting
- change AutotoolsNewMarkerGenerator to store the command
launcher as an ICommandLauncher
- add new CommandLauncherFactory extension to cdt.core that
allows plug-ins to specify a CommandLauncherFactory that
will return an ICommandLauncher based on the project
- add macros for new extension to CCorePlugin
- add new CommandLauncherManager class that loads
CommandLauncherFactory extensions and is used to give
an ICommandLauncher wrapper that will go through the list
of CommandLauncherFactory extensions until one returns
non-null ICommandLauncher
- add code to RemoteCommandLauncher so it will use the
CommandLauncherManager to get the local launcher
- also change RemoteCommandLauncher to check at execution
time whether the command is local and in that case use
the local command launcher
- add new ICommandLauncherFactory interface
- add new ContainerCommandLauncher to launch
- add new ContainerCommandLauncherFactory class for returning
a ContainerCommandLauncher instance to launch commands
in a Docker Container
- change MakeBuilder to use CommandLauncherManager to get
its ICommandLauncher
- change CommandBuilder to use CommandLauncherManager too
- ditto for Builder and AbstractBuiltinSpecsDetector and
ExternalToolInvoker
- change Configuration to load/store optional build properties
as well as return the properties to get/set
- ditto for MultiConfiguration
- change ManagedProject to implement IOptionalBuildOptionProperties
interface
- ditto for ProjectType
- create new OptionalBuildProperties class to store optional
build properties for a configuration
- bump cdt.docker.launcher to 1.1.0
- use CommandLauncherFactory extension to define
ContainerCommandLauncherFactory
- add optional ContainerPropertyTab which allows the end-user to
optionally choose to build a C/C++ project in a Container
and specify the connection/image to use
- in LanguageSettingsSerializableSettings class, call the
CommandLauncherManager getLanguageSettingEntries method
to get the massaged language setting entries based on the
current list
- in LanguageSettingsProviderSerializer, try and get the
pooled entries using the cfg description so that it will
have the project and can use the CommandLauncherManager
to get entries from image
- in ContainerCommandLauncherFactory move cached headers under
a HEADERS directory in the plug-in area
- create a sub-directory for the connection and a sub-directory
for the image based on cleansed names
- store the real names of the connection and image to use
later in the DockerHeaderPreferencePage
- modify LanguageSettingsEntriesTab to force the horizontal
scroll bar to appear (this is a bug in SWT SashForm support
and the fix here isn't quite correct, but is better)
- add new DockerHeaderPreferencePage that allows user to
remove cached headers from images
- change C/C++ Docker preferences to be titled: Docker Container
- fix LanguageSettingsWorkspaceProvider.getSettingEntries method
to use the CommandLauncherManager so entries will be transformed
to use cached headers
- add BaseDatabindingModel class
- add DataVolumeModel class to model a volume mount
- add ContainerPropertyVolumes model to model volume specification
and selected volumes
- add properties to ContainerCommandLauncher to represent
volumes and selected volumes for a configuration
- add ContainerDataVolumeDialog for specifying a volume
mount by the end-user
- add a null detector for cfgDescription in
LanguageSettingsSerializableProvider
- fix AutotoolsNewMakeGenerator.getWinOSType to not specify "." for
working dir
- fix GCCBuiltinSpecsDetectorCygwin to not map paths to Cygwin if
the current configuration is enabled for container build
- add logic to ContainerCommandLauncher to look for Windows
file formats and change them to unix format and map
any "." working dir to be /tmp
- fix ContainerLauncherConfigurationDelegate similarly
- fix AbstractBuiltinSpecsDetector to pass in the current
configuration description when getting the CommandLauncher
since the current configuration may not be the active
configuration
- change ContainerPropertyTab to add Elf and GNU Elf binary parsers
when build in Container is chosen so that output executables
are treated as Binaries by the CDT project
- add documentationl for the ContainerPropertyTab in Build Settings and
the Data Volume dialog pop-up it brings up
- change CommandBuilder to accept a project as an argument
to its constructor and to pass this as an argument to
the CommandLauncherManager
- have StepBuilder pass project when creating a CommandBuilder
Change-Id: Ia78488b93056e6ec7ca83a6c87b3a9d2b9424943
Move the new build system to cdt.core and remove the previous
plugins. Hook the new system into scanner info and environment
variable manager.
Clean up API in preparation for Neon and API lockdown. Hook up
Qt to the new APIs.
Add discovery of MSYS2's toolchain and Qt and Qt's MinGW toolchain.
Change-Id: I85b1a91da4a44e86f0e9da9310f8106c894623e0
Moved new build system to it's own plug-ins. Cleaned up the root
build configuration and toolchain classes and use them for Qt local
run builds. Also hooks Qt local run launch delegate to launch target
manager and associated delegate interface.
Change-Id: I0c0f711ee53005edd399f6d24ba96658d606e1e5
Includes adaptation of the Arduino build model where many of these
ideas started to the new model. And start of the Qt build system which
uses it.
Change-Id: Icb212185773ebc4d415e8a9862101744703ff80b
- these extension produce error that enablement reference is not defined
Change-Id: I1955ea467c1c7e24d0fd02b8e75bd5dc66edc060
Signed-off-by: Alena Laskavaia <elaskavaia.cdt@gmail.com>
The problem is solved by allowing to ignore duplicated markers in case
there is already loaded a plugin that could handle QML files
The ProblemMarkerFilter extension point allows to filter out unneeded
problem markers. For example during building of Qt base project with QML
files tool Qt Linguist could report syntax errors in some qml file.
These errors are presented as "C/C++ Problems" in qml files because they
match format CDT expects for errors. If there is already installed plug-in
that handles QML files it is a wise to ignore such errors because they
are already reported as "QML Problems" with more meaningful descriptions.
Change-Id: I3a0a1b58e9690bed9c2774e4328760c695d54a54
Signed-off-by: Daniel Pesch <dpesch@blackberry.com>
Reviewed-on: https://git.eclipse.org/r/20581
Tested-by: Hudson CI
Reviewed-by: Andrew Eidsness <eclipse@jfront.com>
Reviewed-by: Doug Schaefer <dschaefer@qnx.com>
IP-Clean: Doug Schaefer <dschaefer@qnx.com>
The CDT persists an index of source code relationships by processing the
AST produced by the parser. There is an existing extension-point that
allows contributors to create new linkages in this persisted file.
However there is no mechanism allowing contributors to influence the
data that is stored to the file.
This introduces a new extension-point allowing contributors to
participate in processing the AST that is being persisted to the index.
The intent is for this to be used to store data into the contributor's
new Linkage.
There is no change in functionality for existing linkages. A
contributor will soon be added in the Qt plugin.
Change-Id: I845c90cbf7c713e23319e2ed1168eb7d74db5868
Signed-off-by: Andrew Eidsness <eclipse@jfront.com>
Reviewed-on: https://git.eclipse.org/r/19089
Tested-by: Hudson CI
Reviewed-by: Doug Schaefer <dschaefer@qnx.com>
IP-Clean: Doug Schaefer <dschaefer@qnx.com>
This new extension point allows contributors to put their own
information into the PDOM and to later retrieve it for their own
purposes.
There are many details in the bug. The idea is that contributors
provide an implementation of IBindingTagger, which is given a chance to
examine IBindings when they are created. The ITagWriter interface
allows the contributor to create a new tag which can then have data
written to it.
The ITagService interface (accessible from CCorePlugin.getTagService()
provides a way for the contributor to later get an instance of
ITagReader to retrieve tags from bindings.
ITags are copied to the PDOM when the associated binding is persisteed.
Contributors use a unique id (based on their plugin id), so that
multiple contributors are able to independently tag a given binding.
In-memory tags are not cached. I've done some timing tests using my
sample implementation and found no measurable difference. The full log
lines look like:
!MESSAGE Indexed 'simple-01' (2 sources, 184 headers) in <see below>
sec: 21,550 declarations; 35,394 references; 0 unresolved inclusions; 1
syntax errors; 0 unresolved names (0.00%)
I did 5 tests using the current master (no tagging-related code), the
times were:
18.86 sec
9.17 sec
5.91 sec
4.79 sec
4.83 sec
And then I ran the same sequence of tests using the code in this
commit:
18.73 sec
9.39 sec
6.50 sec
4.78 sec
5.27 sec
If performance does become a problem, then caching could be introduced
with a new implementation of ITaggableService. The two problems are
finding a key other than the identity of the IBinding (since IBindings
are re-created often) and properly evicting stale entries when the
binding is no longer valid.
The process of copying tags from an in-memory IBinding to a PDOMBinding,
is a synchronization. This means that tags that are no longer
applicable, will be removed from the persistent store.
While developing this I found that PDOMBindings are not deleted from the
Database (only the names that reference them are deleted), so there is
no provision for deleting all tags at once.
New database locks are not needed. By the time the persistent tags are
accessed, higher levels of code have already taken a read or write lock
as appropriate.
There are new unit tests covering the changes to the PDOM.
Change-Id: I8da1bf5eeba7e1fc2ca7ec308ed8e212629986a4
Reviewed-on: https://git.eclipse.org/r/10407
IP-Clean: Doug Schaefer <dschaefer@qnx.com>
Tested-by: Doug Schaefer <dschaefer@qnx.com>
Reviewed-by: Doug Schaefer <dschaefer@qnx.com>
This change fixes:
1. Codan no longer shows errors on symbols from pre-built indexes
2. Mark occurances in the editor no properly recognizes occurances
of the same symbol.
Change-Id: I1f3b347524a89f7a4c11b128f15f8fdcffe2afdf
Reviewed-on: https://git.eclipse.org/r/7388
Reviewed-by: Sergey Prigogin <eclipse.sprigogin@gmail.com>
IP-Clean: Sergey Prigogin <eclipse.sprigogin@gmail.com>
Tested-by: Sergey Prigogin <eclipse.sprigogin@gmail.com>
- Reworked IFileSystem utility so that now it is noimplement/noextend. Clients should now extend from concrete class FileSystemUtility instead to better insulate them from future API changes.
- Reworked the resulting concurrency fixes - indexing and scanner discovery now synchronize on the project root as a scheduling rule. Original HEAD behaviour was to synch on the project's .settings folder for indexing, but that deadlocked with scanner discovery.
- Fixed remote indexing. Changes on HEAD that deprecated CodeReader broke the ability for remote translation units to provide the path to load the file content from. Added API to ITranslationUnit for this purpose.
1. Fix for [Bug 184449] [Template Engine] It should be possible to press "Finish" on the first wizard page for templates having default values assigned
2. Fix for [Bug 184593] [Template Engine] Need a way to add tool-chain associations to existing templates
3. Fix for [Bug 184455] [Template Engine] NPE in template engine tests
