Add enforecment script that verifies that only specified file types are
allowed to be mared as executable.
Change-Id: I4b40e3a46b03bfc78a9dcd52e8bf29cb079b7f3b
Signed-off-by: Torbjörn Svensson <azoff@svenskalinuxforeningen.se>
Remove all equalIgnoreCase and equal with uppercasing for environment
variables
Change-Id: Ic15974b5fb62413c7b1826ced544ff6d4a8eba2f
Signed-off-by: jantje <eclipse@baeyens.it>
This was lost when the build system was moved to Maven/Tycho for
CDT 8 and restores the information.
Note that with the p2 baseline compare and replace this will show
the build id of when the branding plugin (the one with the about.mappings)
was built, which compared to the feature version may be older.
The about.mappings, as it is generated on each build, is ignored from
p2 compare and replace.
Change-Id: I38d1fcc5f618d4037baa2c8b908952421c712fc6
This change adds empty enablement expressions where they are missing, in
order to prevent start-up warnings such as:
Enablement expression is missing for config provider for
org.eclipse.cdt.debug.core.coreBuildDescriptorType
Change-Id: Id7f2b6149230ddde24764772c5b67ff5eef28b65
Signed-off-by: Simeon Andreev <simeon.danailov.andreev@gmail.com>
The previous alignment of all the warnings/ignores
led to too many warnings that weren't there before. This
commit relaxes them a bit.
The core/org.eclipse.cdt.core/.settings/org.eclipse.jdt.core.prefs
is still the "master" copy, with
releng/scripts/check_code_cleanliness.sh containing the
exceptions that apply to test plug-ins.
Change-Id: Ibd4e31ade0b42b31e7cbe5a94f06c6fc15183a56
Command used:
# Remove space at eol in comments
find . ! -path "./.git/*" -type f -name *.properties -exec sed -i -E 's/^(#.*)[ \t]+$/\1/' {} +
# Remove space at eol in blank lines
find . ! -path "./.git/*" -type f -name *.properties -exec sed -i -E 's/^[ \t]+$//' {} +
# Replace escaped spaces at eol with unicode
find . ! -path "./.git/*" -type f -name *.properties -exec sed -i -E 's/([^\\])\\ $/\1\\u0020/' {} +
# Replace unescaped spaces at eol with unicode
find . ! -path "./.git/*" -type f -name *.properties -exec sed -i -E 's/([^\\]) $/\1\\u0020/' {} +
# Replace escaped tabs at eol with unicode
find . ! -path "./.git/*" -type f -name *.properties -exec sed -i -E 's/([^\\])\\\t$/\1\\u0009/' {} +
# Replace unescaped tabs at eol with unicode
find . ! -path "./.git/*" -type f -name *.properties -exec sed -i -E 's/([^\\])\t$/\1\\u0009/' {} +
# Stage all changes
git add -A .
# trim any remaining whitespace and then identify and fixup
# manually
# Only dsf/org.eclipse.cdt.dsf.ui/src/org/eclipse/cdt/dsf/debug/ui/viewmodel/MessagesForDebugVM.properties
# needed this due to missing newline at end of the file
find . ! -path "./.git/*" -type f -name *.properties -exec sed -i -E 's/[ \t]+$//' {} +
Change-Id: I858f16891fe001f4f7e62d5a4f904146e891cd39
These were inserted in the past automatically by Eclipse but
newer tooling makes them redundant.
These were removed by doing a global find/replace on *.java files
using the following regular expression:
\t/\*\n\t \* \(non-Javadoc\)[^/]*/\n
Change-Id: I59d3248020f10934fde1dda5b5a31e20bb188e19
This was done by selecting all projects in Eclipse then
Source -> Clean Up... -> choosing:
- Add missing Annotations - and selecting all three types:
- @Override
- @Override on interface methods
- @Deprecated
and completing the wizard
Change-Id: I5d367dacb04327107f25e147edc08efc4eb1c2fe
This was done by selecting all projects in Eclipse then
Source -> Clean Up... -> choosing:
- Format source code
- Remove trailing white spaces on all lines
and completing the wizard
Change-Id: I63685372c6bcc67719bcf145123bcb72e5b00394
The releng/scripts/apply_jdt_prefs_to_all_projects.sh was run to
copy standard settings to all other projects.
Change-Id: I4436c947d7f0142f56b709e661379c3eb54f666b
There is also a new script to verify completeness of .gitattributes:
releng/scripts/verify_gitattributes.sh
Change-Id: I2ce270852ab54b66b6c474a6ec94203fe5bba78b
Ensure that the remote connection has been opened before showing
RemoteResourceBrowser dialog so that the dialog's layout would not
depend on the state of the connection.
Change-Id: Iec70c243b75723de418e55a1f07cd8e9804400b6
Signed-off-by: Chin Huat Ang <chin.huat.ang@intel.com>
In the new toolchain wizard, the select button wasn't hooked up.
So I turned it off. Also, we had no build settings tab on the serial
launch.
Change-Id: I811f579334889085f49d298878589109c5e4a228
Removed the empty debug.core.tests project. Also removed the
utils-feature and remote-feature projects since these shouldn't
be features.
Change-Id: Ib5d297c626de5328e3421a1fc9346330d9907750
Adds target, launch classes, and launch bar support for targets
intended to upload their code to flash using a Serial Port. The
port is co-ordinated with the Serial Terminal so that the terminal
is paused during the upload.
Also cleaned up the Generic Launch so it's not using the
External Tools launch which has a number of UX issues. This
simplifies the settings and gives us more control. And it's made
reusable for the Serial Flash launch.
Change-Id: I31e9970243fbf1cf22d027bbdb892fde104dbefe
Also restructures the pom.xmls to put the modules in the top level
so we can order them to have the test plugins build after them.
Change-Id: I2f0e4ebd252791fb8844cdf0f635d574946207aa
- This commit is still needed to allow CDT Sonar job to run
so that features that have same name as plug-ins
will be distinguishable by Sonar job
Change-Id: I3eb3f3cf94d5f4338d72c5d19d0baf2f7506c388
Those features have the exact same id and groupid than a plugin
which throws off SonarQube with:
"Two modules have the same id: 'org.eclipse.cdt:org.eclipse.cdt.util'.
Each module must have a unique id."
In the pom.xml, we can specify a different groupid which resolves the
problem. Alternatively, the feature id could have been changed but that
would break upgrades.
Change-Id: Ib2912ad854a3af431b96f89a6ead1bcb6d06ba60
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
